Add-VmNetworkAdapterRoutingDomainMapping

Add-VmNetworkAdapterRoutingDomainMapping

Adds a routing domain and virtual subnets to a virtual network adapter.

Sintaxis

Parameter Set: VMName
Add-VmNetworkAdapterRoutingDomainMapping [-VMName] <String[]> [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] [-ComputerName <String[]> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ManagementOS
Add-VmNetworkAdapterRoutingDomainMapping [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] -ManagementOS [-ComputerName <String[]> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ResourceObject
Add-VmNetworkAdapterRoutingDomainMapping [-VMNetworkAdapter] <VMNetworkAdapterBase[]> [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: VMObject
Add-VmNetworkAdapterRoutingDomainMapping [-VM] <VirtualMachine[]> [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descripción detallada

The Add-VmNetworkAdapterRoutingDomainMapping cmdlet adds a routing domain and virtual subnets to a virtual network adapter. The cmdlet adds the information about the routing domain and virtual subnets to connected multitenant virtual machines.

Parámetros

-ComputerName<String[]>

Specifies an array of Hyper-V hosts. The cmdlet adds the routing domain and virtual subnet to a virtual network adapter on the Hyper-V hosts that you specify.

-IsolationID<Int32[]>

Specifies an array of IDs of virtual subnets. The cmdlet adds the virtual subnets that you specify to the virtual network adapter. You can isolate a virtual machine adapter by using virtual local area network (VLAN), Hyper-V Network Virtualization, or a third party virtualization solution. For more information about isolation IDs, see the Set-VmNetworkAdapterIsolation cmdlet.

-IsolationName<String[]>

Specifies an array of names of virtual subnets. The cmdlet adds the virtual subnets that you specify to the virtual network adapter. The subnet uses VLAN or Hyper-V Network Virtualization.

-ManagementOS

Indicates that the cmdlet operates on the parent or host operating system.

-Passthru

Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.

-RoutingDomainID<String>

Specifies the ID of a routing domain. The ID of a routing domain is a system-assigned GUID. The cmdlet adds the routing domain that you specify to the virtual network adapter.

-RoutingDomainName<String>

Specifies the name of a routing domain. The cmdlet adds the routing domain that you specify to the virtual network adapter.

-VM<VirtualMachine[]>

Specifies an array of virtual machine objects. The cmdlet adds the routing domain to the network interfaces that belong to the virtual machines that you specify. To obtain a virtual machine object, use the Get-VM cmdlet.

-VMName<String[]>

Specifies an array of friendly names of virtual machines. The cmdlet adds the routing domain to the network interfaces that belong to the virtual machines that you specify.

-VMNetworkAdapter<VMNetworkAdapterBase[]>

Specifies an array of virtual network adapter as VMNetworkAdapterBase objects. The cmdlet adds the routing domain on the adapters that you specify. To obtain a network adapter, use the Get-VMNetworkAdapter cmdlet.

-VMNetworkAdapterName<String>

Specifies the name of a virtual network adapter. The cmdlet adds the routing domain on adapter that you specify.

-Confirm

Solicita confirmación antes de ejecutar el cmdlet.

-WhatIf

Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

Ejemplos

Example 1: Add a tenant and virtual subnet to a multitenant virtual network

This command adds a tenant that has the specified routing domain to the virtual network adapter named Internal NIC that belongs to the multitenant virtual machine named Gateway01. The command also adds the virtual subnet that has the ID 6000 to the virtual network adapter.

PS C:\> Add-VMNetworkAdapterRoutingDomainMapping -VMName "Gateway01" -VMNetworkAdapterName "Internal NIC" –RoutingDomainID "{5a07361e-6a54-49fc-9210-bfbf14a5c56f}" RoutingDomainName "Contoso" -IsolationID 6000 -IsolationName "ContosoGatewayVsid"

Temas relacionados

Get-VMNetworkAdapterRoutingDomainMapping

Set-VmNetworkAdapterRoutingDomainMapping

Remove-VMNetworkAdapterRoutingDomainMapping

Get-VM