Set-NetEventPacketCaptureProvider
Set-NetEventPacketCaptureProvider
Modifies the configuration for a Remote Packet Capture provider.
Syntaxe
Parameter Set: BySessionName
Set-NetEventPacketCaptureProvider [[-SessionName] <String[]> ] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: BySessionOfTheProvider
Set-NetEventPacketCaptureProvider [-AssociatedEventSession <CimInstance> ] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: ByTargetOfTheProvider
Set-NetEventPacketCaptureProvider [-AssociatedCaptureTarget <CimInstance> ] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: InputObject (cdxml)
Set-NetEventPacketCaptureProvider [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [[-Level] <Byte> ] [[-MatchAnyKeyword] <UInt64> ] [[-MatchAllKeyword] <UInt64> ] [[-CaptureType] <CaptureType> {Physical | Switch | BothPhysicalAndSwitch} ] [[-MultiLayer] <Boolean> ] [[-LinkLayerAddress] <String[]> ] [[-EtherType] <UInt16[]> ] [[-IpAddresses] <String[]> ] [[-IpProtocols] <Byte[]> ] [[-TruncationLength] <UInt16> ] [[-VmCaptureDirection] <VmCaptureDirection> {Ingress | Egress | IngressAndEgress} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Description détaillée
The Set-NetEventPacketCaptureProvider cmdlet modifies the configuration for a Remote Packet Capture provider.
Paramètres
-AssociatedCaptureTarget<CimInstance>
Specifies the associated capture target as a CIM object. The capture target is one of the three following objects:
-- MSFT_NetEventNetworkAdapter
-- MSFT_NetEventVmNetworkAdapter
-- MSFT_NetEventVmSwitch
To obtain a capture target, use the Get-NetEventNetworkAdapter cmdlet, the Get-NetEventVmNetworkAdapter cmdlet, or the Get-NetEventVmSwitch cmdlet.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByValue) |
Accepter les caractères génériques ? |
false |
-AssociatedEventSession<CimInstance>
Specifies the associated network event session, as a CIM object. To obtain the network event session, use the Get-NetEventSession cmdlet.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByValue) |
Accepter les caractères génériques ? |
false |
-CaptureType<CaptureType>
Specifies the capture type. Acceptable values for this parameter are:
-- SaveToFile. Writes events to a local .etl file.
-- RealtimeRPC. Creates a real-time capture session and forwards the events to a remote host as they are recorded.
-- RealtimeLocal. Creates a real-time capture session and forwards the events to a local Event Tracing for Windows (ETW) listener as they are recorded.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4008 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-CimSession<CimSession[]>
Exécute l’applet de commande dans une session à distance ou sur un ordinateur distant. Entrez un nom d’ordinateur ou un objet de session, comme la sortie d’une applet de commande New-CimSession ou Get-CimSession. La valeur par défaut est la session active sur l’ordinateur local.
Alias |
Session |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-EtherType<UInt16[]>
Specifies an array of ether types. The most common ether types and their values are IPv4 (0800), IPv6 (86DD) and ARP (0806).
Alias |
none |
Obligatoire ? |
false |
Position ? |
4011 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-IpAddresses<String[]>
Specifies an array of IP addresses on which to filter. The packet capture provider logs network traffic that matches this filter.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4012 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-IpProtocols<Byte[]>
Specifies an array of one or more IP protocols, such as TCP or UDP, on which to filter. The packet capture provider logs network traffic that matches this filter.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4013 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-Level<Byte>
Specifies the level of Event Tracing for Windows (ETW) events for the provider. Use the level of detail for the event to filter the events that are logged. The default value for this parameter is 0x4. Acceptable values for this parameter are:
-- 0x5. Verbose
-- 0x4. Informational
-- 0x3. Warning
-- 0x2. Error
-- 0x1. Critical
-- 0x0. LogAlways
The provider must log the event if the value of the event is less than or equal to the value of this parameter.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4005 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-LinkLayerAddress<String[]>
Specifies an array of link layer, or Media Access Control (MAC), addresses. The packet capture provider logs network traffic that matches this filter.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4010 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-MatchAllKeyword<UInt64>
Specifies a bitmask that restricts the events that the provider logs.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4007 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-MatchAnyKeyword<UInt64>
Specifies keywords as a set of hexadecimal values. Keywords are flags that you can combine to generate values. Use a set of hexadecimal values of the keywords instead of the keyword names, and apply a filter to write ETW events for keyword matches.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4006 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-MultiLayer<Boolean>
Indicates whether the capture should occur at various layers in the stack. This setting has a value of $False by default.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4009 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-PassThru
Retourne un objet qui représente l’élément avec lequel vous travaillez. Par défaut, cette applet de commande ne génère aucun résultat.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-SessionName<String[]>
Specifies the name of the session associated with the packet capture provider.
Alias |
none |
Obligatoire ? |
false |
Position ? |
1 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-ThrottleLimit<Int32>
Spécifie le nombre maximal d’opérations simultanées qui peuvent être établies pour exécuter cette applet de commande. Si ce paramètre est omis ou si la valeur 0
est entrée, Windows PowerShell ® calcule une limitation optimale pour l’applet de commande en fonction du nombre d’applets de commande CIM qui s’exécutent sur l’ordinateur. La limitation s’applique seulement à l’applet de commande actuelle, et non pas à la session ni à l’ordinateur.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-TruncationLength<UInt16>
Specifies the display length of each captured packet. The default size is 128 bytes.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4014 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-VmCaptureDirection<VmCaptureDirection>
Specifies the direction of network traffic for a Virtual Machine (VM) capture. Les valeurs acceptables pour ce paramètre sont :
-- Ingress. Network traffic from a VM to a virtual switch.
-- Egress. Network traffic from a virtual switch to a VM.
Alias |
none |
Obligatoire ? |
false |
Position ? |
4015 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-Confirm
Votre confirmation sera requise avant l’exécution de l’applet de commande.
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
false |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-WhatIf
Présente les conséquences éventuelles de l’exécution de l’applet de commande. L’applet de commande n’est pas exécutée.
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
false |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
<CommonParameters>
Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d’informations, consultez about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
<WorkflowParameters>
Cette applet de commande prend en charge les paramètres de workflow courants suivants : -PSParameterCollection, -PSComputerName, -PSCredential, -PSConnectionRetryCount, -PSConnectionRetryIntervalSec, -PSRunningTimeoutSec, -PSElapsedTimeoutSec, -PSPersist, -PSAuthentication, -PSAuthenticationLevel, -PSApplicationName, -PSPort, -PSUseSSL, -PSConfigurationName, -PSConnectionURI, -PSAllowRedirection, -PSSessionOption, -PSCertificateThumbprint, -PSPrivateMetadata, -AsJob, -JobName et –InputObject. Pour plus d’informations, consultez about_WorkflowCommonParameters.
Entrées
Le type d’entrée correspond au type des objets que vous pouvez transmettre à l’applet de commande.
Sorties
Le type de sortie est le type des objets émis par l’applet de commande.
Exemples
Example 1: Modify a packet capture provider
This example modifies a packet capture provider.
The first command uses the New-NetEventSession cmdlet to create a new session named Session01.
The second command uses the Add-NetEventProvider cmdlet to add a TCP/IP Net provider to the session.
The third command uses the Add-NetEventPacketCaptureProvider cmdlet to add a packet capture provider to a session named Session01.
The fourth command modifies the packet capture provider settings.
PS C:\> New-NetEventSession -SessionName "Session01"
PS C:\> Add-NetEventProvider -Name "Microsoft-Windows-TCPIP" -SessionName "Session01"
PS C:\> Add-NetEventPacketCaptureProvider -SessionName "Session01"
PS C:\> Set-NetEventPacketCaptureProvider -SessionName "Session01" -IpAddresses 182.168.0.1 -IpProtocol 6
PS C:\>
PS C:\>
PS C:\>
Rubriques connexes
Add-NetEventPacketCaptureProvider
Get-NetEventPacketCaptureProvider