Set-DnsServerZoneTransferPolicy

Set-DnsServerZoneTransferPolicy

Updates a zone transfer policy on a DNS server.

構文

Parameter Set: InputObject
Set-DnsServerZoneTransferPolicy [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-ZoneName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: Server
Set-DnsServerZoneTransferPolicy [-Name] <String> [-CimSession <CimSession[]> ] [-ClientSubnet <String> ] [-ComputerName <String> ] [-Condition <String> {AND | OR} ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-InternetProtocol <String> ] [-PassThru] [-ProcessingOrder <UInt32> ] [-ServerInterfaceIP <String> ] [-ThrottleLimit <Int32> ] [-TimeOfDay <String> ] [-TransportProtocol <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: Zone
Set-DnsServerZoneTransferPolicy [-Name] <String> [-ZoneName] <String> [-CimSession <CimSession[]> ] [-ClientSubnet <String> ] [-ComputerName <String> ] [-Condition <String> {AND | OR} ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-InternetProtocol <String> ] [-PassThru] [-ProcessingOrder <UInt32> ] [-ServerInterfaceIP <String> ] [-ThrottleLimit <Int32> ] [-TimeOfDay <String> ] [-TransportProtocol <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

詳細説明

The Set-DnsServerZoneTransferPolicy cmdlet updates a zone transfer policy on a Domain Name System (DNS) server.

パラメーター

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。

-ClientSubnet<String>

Specifies the client subnet criterion. Specify a criterion in the following format:

operator, value01, value02, . . . , operator, value03, value04, . . .

The operator is either EQ or NE. You can specify no more than one of each operator in a criterion.

The policy treats values that follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the subnet of the zone transfer matches one of the EQ values and does not match any of the NE values.

-ComputerName<String>

Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as an FQDN, host name, or NETBIOS name.

-Condition<String>

Specifies how the policy treats multiple criteria. このパラメーターに指定できる値は、次のとおりです。

-- OR. The policy evaluates criteria as multiple assertions which are logically combined (OR'd).
-- AND. The policy evaluates criteria as multiple assertions which are logically differenced (AND'd).

The default value is AND.

-InformationAction<System.Management.Automation.ActionPreference>

-InformationVariable<System.String>

-InternetProtocol<String>

Specifies the Internet Protocol criterion. Specify a criterion in the following format:

operator, value01, value02, . . . , operator, value03, value04, . . .

The operator is either EQ or NE. You can specify no more than one of each operator in a criterion.

The policy treats values that follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the IP address of the zone transfer matches one of the EQ values and does not match any of the NE values.

-Name<String>

Specifies the name of the policy to update.

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットから出力は生成されません。

-ProcessingOrder<UInt32>

Specifies the precedence of the policy. Higher integer values have lower precedence. By default, this cmdlet adds a new policy as the lowest precedence.

-ServerInterfaceIP<String>

Specifies the IP address of the server interface on which the DNS server listens. Specify a criterion in the following format:

operator, value01, value02, . . . , operator, value03, value04, . . .

The operator is either EQ or NE. You can specify no more than one of each operator in the criterion.

The policy treats values the follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the IP address of the interface matches one of the EQ values and does not match any of the NE values.

-ThrottleLimit<Int32>

コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0 を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。

-TimeOfDay<String>

Specifies the time of day criterion. Specify a criterion in the following format:

operator, value01, value02, . . . , operator, value03, value04, . . .

The operator is either EQ or NE. You can specify no more than one of each operator in the criterion.

The policy treats values the follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the time of day of the zone transfer matches one of the EQ values and does not match any of the NE values.

-TransportProtocol<String>

Specifies the transport protocol criterion. Specify a criterion in the following format:

operator, value01, value02, . . . , operator, value03, value04, . . .

The operator is either EQ or NE. You can specify no more than one of each operator in the string.

The policy treats values the follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the transport protocol of the zone transfer matches one of the EQ values and does not match any of the NE values.

-ZoneName<String>

Specifies the name of a DNS zone on which the zone level policy exists. The zone must exist on the DNS server.

-Confirm

コマンドレットを実行する前に確認メッセージを表示します。

-WhatIf

コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。

<WorkflowParameters>

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットが出力するオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#DnsServerPolicy

使用例

Example 1: Update a zone transfer policy

This command updates the zone transfer policy named InternalTransfers. The command modifies the transport protocol and the server interface IP address criterial. For the server interface IP address, the command specifies $Null, which removes the previously set criterion.

PS C:\> Set-DnsServerZoneTransferPolicy -Name "InternalTransfers" -TransportProtocol "NE,TCP" -ServerInterfaceIP $Null 

関連項目

Add-DnsServerZoneTransferPolicy

Get-DnsServerZoneTransferPolicy

Remove-DnsServerZoneTransferPolicy

Start-DnsServerZoneTransfer

Add-DnsServerQueryResolutionPolicy