Get-DnsServerZoneTransferPolicy
Get-DnsServerZoneTransferPolicy
Gets the zone transfer policies on a DNS server.
構文
Parameter Set: Server
Get-DnsServerZoneTransferPolicy [[-Name] <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: Zone
Get-DnsServerZoneTransferPolicy [[-Name] <String> ] [-ZoneName] <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
詳細説明
The Get-DnsServerZoneTransferPolicy cmdlet gets zone transfer policies on a Domain Name System (DNS) server. Specify a zone by name to get zone level policies. If you do not specify a zone, this cmdlet gets server level policies.
パラメーター
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
Session |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ComputerName<String>
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as an FQDN, host name, or NETBIOS name.
Aliases |
Cn |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-InformationAction<System.Management.Automation.ActionPreference>
Aliases |
infa |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-InformationVariable<System.String>
Aliases |
iv |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Name<String>
Specifies the name of the policy to get.
Aliases |
none |
必須/オプション |
false |
位置 |
2 |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-ThrottleLimit<Int32>
コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0
を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ZoneName<String>
Specifies the name of a DNS zone. This cmdlet gets policies from the zone that this parameter specifies.
Aliases |
none |
必須/オプション |
true |
位置 |
3 |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
<WorkflowParameters>
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
- Microsoft.Management.Infrastructure.CimInstance#DnsServerPolicy[]
使用例
Example 1: Get all server level zone transfer policies
This cmdlet gets all the server level zone transfer policies.
PS C:\> Get-DnsServerZoneTransferPolicy
Example 2: Get all zone transfer policies for a zone
This command gets all the zone transfer policies for the zone named contoso.com.
PS C:\> Get-DnsServerZoneTransferPolicy -ZoneName "contoso.com"
Example 3: Get a particular zone level policy
This command gets the zone transfer policy named InternalTransfers on the zone named contoso.com.
PS C:\> Get-DnsServerZoneTransferPolicy -ZoneName "contoso.com" -Name "InternalTransfers"
Example 4: Get a server level zone transfer policy
This command gets the server level zone transfer policy named InternalTransfers.
PS C:\> Get-DnsServerZoneTransferPolicy -Name "InternalTransfers"
関連項目
Add-DnsServerZoneTransferPolicy
Remove-DnsServerZoneTransferPolicy