Set-BgpRouter
Set-BgpRouter
Modifies the local BGP router configuration.
구문
Parameter Set: Set3
Set-BgpRouter [-AsJob] [-BgpIdentifier <IPAddress> ] [-CimSession <CimSession[]> ] [-CompareMEDAcrossASN <Boolean> ] [-DefaultGatewayRouting <Boolean> ] [-Force] [-IPv6Routing <IPv6RoutingState> ] [-LocalASN <UInt32> ] [-LocalIPv6Address <IPAddress> ] [-PassThru] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-BgpRouter cmdlet modifies the configuration of the local Border Gateway Protocol (BGP) router for a tenant. You can modify the IPv4 address of a local BGP router, specify whether the BGP router compares Multi-Exit Discriminator (MED) values across different autonomous systems, and specify whether the cmdlet enables routing of the unresolvable routes to the default gateway. You can also modify the state of IPv6 routing for the BGP router and the IPv6 address of a local BGP router.
Use the Get-BgpRouter cmdlet to see the current settings.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-BgpIdentifier<IPAddress>
Specifies the IPv4 address of a local BGP router.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CompareMEDAcrossASN<Boolean>
Indicates whether the BGP router compares Multi-Exit Discriminator (MED) values across different autonomous systems.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DefaultGatewayRouting<Boolean>
Indicates whether the cmdlet enables routing of the unresolvable routes to the default gateway.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IPv6Routing<IPv6RoutingState>
Specifies the state of IPv6 routing for the BGP router. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Enable
-- Disable
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalASN<UInt32>
Specifies the autonomous system number (ASN) for the local router.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalIPv6Address<IPAddress>
Specifies the Internet IPv6 address of a local BGP router. This parameter specifies the global or site-local Internet IPv6 address for the local BGP router. The BGP router uses this IP address as the next hop value in the IPv6 route advertisements.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the name, as a string, of a routing domain. The name of a routing domain is a user-defined alphanumeric string. It must be unique.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#BgpRouterConfig
예제
Example 1: Modify the configuration of the local BGP router
This command modifies the configuration of the local BGP router and restarts all the active BGP peerings. The command specifies that the ASN of the local BGP router instance is 64513. The command prompts the user for confirmation before it modifies the configuration of the router. The command includes the PassThru parameter, so the command sends a BgpRouterConfig object to the console.
PS C:\> Set-BgpRouter -LocalASN 64513 -PassThru
Example 2: Modify the configuration of the local BGP router without confirmation
This command modifies the configuration of the local BGP router and restarts all the active BGP peerings. The command specifies that the ASN of the local BGP router instance is 64513. The command does not prompt the user for confirmation before it modifies the configuration of the router.
PS C:\> Set-BgpRouter -LocalASN 64513 -Force -PassThru
Example 3: Modify the configuration of a BGP router in a routing domain
This command modifies the configuration of the BGP router for the routing domain named Rd_001. The command specifies the IP address of the local BGP router for the routing domain, and it specifies that the ASN of the local BGP router instance is 64522.
PS C:\> Set-BgpRouter -RoutingDomain "Rd_001" -BgpIdentifier 10.1.1.10 -LocalASN 64522 -PassThru