Get-BgpRouter
Get-BgpRouter
Gets configuration information for BGP routers.
구문
Parameter Set: Get1
Get-BgpRouter [-CimSession <CimSession[]> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-RoutingDomain <String[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Get-BgpRouter cmdlet gets router configuration information for Border Gateway Protocol (BGP) routers. In a multitenant deployment, the cmdlet adds a BGP router for the routing domain or a tenant. In a non-multitenant deployment, the cmdlet configures the BGP router for the local computer. In a multitenant deployment, you must specify the RoutingDomain parameter. In a non-multitenant deployment, do not specify the RoutingDomain parameter.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String[]>
Specifies an name, as a string, of a routing domain. The name of a routing domain is a unique user-defined alphanumeric string.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
- Microsoft.Management.Infrastructure.CimInstance#BgpRouterConfig[]
예
Example 1: Get configuration information of a BGP router
This command gets the configuration information of the local BGP router.
PS C:\> Get-BgpRouter
Example 2: Get configuration information of a router for a routing domain
This command gets the configuration information of the BGP router for the routing domain that has the ID Rd_001.
PS C:\> Get-BgpRouter -RoutingDomain "Rd_001"