Remove-WdsClient
Remove-WdsClient
Removes a pre-staged client from AD DS or the stand-alone server device database, or clears the Pending Devices database.
구문
Parameter Set: PendingClientByStatus
Remove-WdsClient -PendingClientStatus <PendingClientStatusFlag> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: PrestagedClientByDeviceId
Remove-WdsClient -DeviceID <String> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: PrestagedClientByDeviceIdDomain
Remove-WdsClient -DeviceID <String> -Domain [-AsJob] [-CimSession <CimSession[]> ] [-DomainName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: PrestagedClientByDeviceIdSearchForest
Remove-WdsClient -DeviceID <String> -SearchForest [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: PrestagedClientByDeviceName
Remove-WdsClient -DeviceName <String> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: PrestagedClientByDeviceNameDomain
Remove-WdsClient -DeviceName <String> -Domain [-AsJob] [-CimSession <CimSession[]> ] [-DomainName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: PrestagedClientByDeviceNameSearchForest
Remove-WdsClient -DeviceName <String> -SearchForest [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Remove-WdsClient cmdlet removes a pre-staged client from Active Directory® 도메인 서비스 (AD DS) or the stand-alone server device database, or clears the Pending Devices database.
To remove pre-staged client from AD DS, specify the name of the computer or the device ID, which is a GUID, media access control (MAC) address, or Dynamic Host Configuration Protocol (DHCP) identifier associated with the computer. You can specify a client within AD DS domain of the server that runs Windows Deployment Services, within a specified domain, or anywhere in the current AD DS forest.
To clear the Pending Devices database, specify whether to remove devices that are approved, denied, or pending.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DeviceID<String>
Specifies the ID of the computer. This identifier is the GUID of a network interface card, a MAC address, or a DHCP unique identifier associated with the computer.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DeviceName<String>
Specifies the name of the computer associated with the pre-staged client. This is a sAMAccountName value.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Domain
Indicates that the cmdlet refers to pre-staged clients within the domain specified by the DomainName parameter, instead of the domain of the server that runs Windows Deployment Services or the entire forest.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DomainName<String>
Specifies a domain name. Specify a value for this parameter only if you specify the Domain parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PendingClientStatus<PendingClientStatusFlag>
Specifies a pending client status. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Any
-- Approved
-- Denied
-- Pending
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SearchForest
Indicates that the cmdlet refers to pre-staged devices anywhere in the current AD DS forest. If you do not specify this parameter and do not specify the Domain parameter, the cmdlet looks for pre-staged devices in the local domain.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Remove a device by using its ID from a specified domain
This command removes the pre-staged device that has the specified ID. The cmdlet searches the domain named TSQA.Contoso.com for the device.
PS C:\> Remove-WdsClient -DeviceID "5a7a1def-2e1f-4a7b-a792-ae5275b6ef92" -Domain -DomainName "TSQA.Contoso.com"
Example 2: Remove a device by using its name from a specified domain
This command removes the pre-staged device named TSQA014. The cmdlet searches the domain named TSQA.Contoso.com for the device.
PS C:\> Remove-WdsClient -DeviceName "TSQA014" -Domain -DomainName "TSQA.Contoso.com"
Example 3: Remove a device by using its ID
This command removes a pre-staged device that has the specified ID. The cmdlet searches the entire forest for the device.
PS C:\> Remove-WdsClient -DeviceID "5a7a1def-2e1f-4a7b-a792-ae5275b6ef92" -SearchForest
Example 4: Remove a device by using its name
This command removes a pre-staged device named TSQA073. The cmdlet searches the entire forest for the device.
PS C:\> Remove-WdsClient -DeviceName "TSQA073" -SearchForest
Example 5: Remove all approved devices in the local domain
This command removes pre-staged devices that have a pending status of Approved. Because the command does not specify the Domain parameter or the SearchForest parameter, it removes devices only in the local domain.
PS C:\> Remove-WdsClient -PendingClientStatus Approved