Get-WdsClient

Get-WdsClient

Gets client devices from the pending device database, or pre-staged devices from Active Directory or the stand-alone server device database.

구문

Parameter Set: PrestagedClientByDeviceName
Get-WdsClient [-AsJob] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PendingClientByRequestId
Get-WdsClient -RequestId <UInt32> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PendingClientByStatus
Get-WdsClient -PendingClientStatus <PendingClientStatusFlag> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PrestagedClientByDeviceId
Get-WdsClient -DeviceID <String> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PrestagedClientByDeviceIdDomain
Get-WdsClient -DeviceID <String> -Domain [-AsJob] [-CimSession <CimSession[]> ] [-DomainName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PrestagedClientByDeviceIdSearchForest
Get-WdsClient -DeviceID <String> -SearchForest [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PrestagedClientByDeviceNameDomain
Get-WdsClient -Domain [-AsJob] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-DomainName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: PrestagedClientByDeviceNameSearchForest
Get-WdsClient -SearchForest [-AsJob] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

자세한 설명

The Get-WdsClient cmdlet gets client devices from the Pending Device database, or pre-staged clients from Active Directory® 도메인 서비스 (AD DS) or the stand-alone server device database.

You can get client devices or pre-staged clients by specifying a name or an ID. An ID is a GUID, media access control (MAC) address, or Dynamic Host Configuration Protocol (DHCP) identifier associated with the computer.

When you get clients from AD DS, you can specify a client within AD DS domain of the server that runs Windows Deployment Services, within a specified domain, or anywhere in the current AD DS forest.

To get pre-staged clients from the Pending Devices database, specify whether to get devices that are approved, denied, or pending.

매개 변수

-AsJob

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-DeviceID<String>

Specifies the ID of the computer. This identifier is the GUID of a network interface card, a MAC address, or a DHCP unique identifier associated with the computer.

-DeviceName<String>

Specifies the name of the computer associated with the pre-staged client. This is a sAMAccountName value.

-Domain

Indicates that the cmdlet refers to pre-staged clients within the domain specified by the DomainName parameter, instead of the domain of the server that runs Windows Deployment Services or the entire forest.

-DomainName<String>

Specifies a domain name. Specify a value for this parameter only if you specify the Domain parameter.

-PendingClientStatus<PendingClientStatusFlag>

Specifies a pending client status. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Any
-- Approved
-- Denied
-- Pending

-RequestId<UInt32>

Specifies the request ID that the server that runs Windows Deployment Services allocates to a device in the Pending Device database. If you do not specify this parameter, the cmdlet gets all devices that match the value specified in the PendingClientStatus parameter.

-SearchForest

Indicates that the cmdlet refers to pre-staged devices anywhere in the current AD DS forest. If you do not specify this parameter and do not specify the Domain parameter, the cmdlet looks for pre-staged devices in the local domain.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsClient

예제

Example 1: Get a device in a domain by specifying its ID

This command gets the device that has the specified ID. The command looks for this device in the AD DS domain named TSQA.Contoso.com.

PS C:\> Get-WdsClient -DeviceID "5a7a1def-2e1f-4a7b-a792-ae5275b6ef92" -Domain -DomainName "TSQA.Contoso.com"

Example 2: Get a device in a domain by specifying its ID

This command gets the device named TSQA076. The command looks for this device in the AD DS domain named TSQA.Contoso.com.

PS C:\> Get-WdsClient -DeviceName "TSQA076" -Domain "TSQA.Contoso.com"

Example 3: Get a device in the current forest by specifying its ID

This command gets the device that has the specified ID. The command looks for this device in the current AD DS forest.

PS C:\> Get-WdsClient -DeviceID "5a7a1def-2e1f-4a7b-a792-ae5275b6ef92" -SearchForest

Example 4: Get a device in the current forest by specifying its name

This command gets the device named TSQA022. The command looks for this device in the current AD DS forest.

PS C:\> Get-WdsClient -DeviceName "TSQA022" -SearchForest

Example 5: Get all pending devices

This command gets all clients that have a status of Pending in the Pending Devices database.

PS C:\> Get-WdsClient -PendingClientStatus Pending

Example 6: Get a pending device by specifying its request ID

This command gets the client that has the request ID 21 in the Pending Devices database.

PS C:\> Get-WdsClient -RequestId 21

관련 항목

Approve-WdsClient

Deny-WdsClient

New-WdsClient

Remove-WdsClient

Set-WdsClient