Set-DfsrGroupSchedule
Set-DfsrGroupSchedule
Modifies a replication group schedule.
구문
Parameter Set: ScheduleNameParameterSet
Set-DfsrGroupSchedule [-GroupName] <String[]> [[-UseUTC] <Boolean> ] [[-ScheduleType] <GroupScheduleType> {Always | Never} ] [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: CustomScheduleParameterSet
Set-DfsrGroupSchedule [-GroupName] <String[]> [[-UseUTC] <Boolean> ] [-Day] <DayOfWeek[]> [-BandwidthDetail] <String> [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DfsrGroupSchedule cmdlet modifies a schedule for a replication group. DFS Replication schedules control the availability and bandwidth usage of replication.
By default, DFS Replication schedules replication 24 hours a day, 7 days a week with full bandwidth as the recommended configuration.
매개 변수
-BandwidthDetail<String>
Specifies a custom schedule value string that defines the bandwidth settings for each 15-minute interval block, with 4 blocks to a set, where each set represents 1 hour, and there are 24 sets. The time starts at 00:00 and ends at 24:00. The valid settings on a 15-minute block are 0 through F, with the following mapping of settings:
0 = No replication.
1 = 16 kilobits per second (Kbps).
2 = 64 Kbps.
3 = 128 Kbps.
4 = 256 Kbps.
5 = 512 Kbps.
6 = 1 megabit per second (Mbps).
7 = 2 Mbps.
8 = 4 Mbps.
9 = 8 Mbps.
A = 16 Mbps.
B = 32 Mbps.
C = 64 Mbps.
D = 128 Mbps.
E = 256 Mbps.
F = Full bandwidth replication.
You must specify a complete value string and include all 24 hourly 4-block sets (for a total of 96 hexadecimal characters). For example: ffffffffffff0000ffff0000ffff00004444000044440000444400004444000044440000ffff0000ffff0000ffffffff
별칭 |
없음 |
필수 여부 |
true |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Day<DayOfWeek[]>
Specifies a day of the week. You can specify either an enumerated string value or its corresponding integer value. Acceptable values for this parameter are:
-- Sunday (0)
-- Monday (1)
-- Tuesday (2)
-- Wednesday (3)
-- Thursday (4)
-- Friday (5)
-- Saturday (6)
별칭 |
없음 |
필수 여부 |
true |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DomainName<String>
Specifies a NetBIOS or fully qualified domain name (FQDN) for an Active Directory domain that contains the replication group. If you do not specify this parameter, the cmdlet uses the current domain.
별칭 |
없음 |
필수 여부 |
false |
위치 |
101 |
기본값 |
[Current Domain] |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-GroupName<String[]>
Specifies an array of names of replication groups . If you do not specify this parameter, the cmdlet queries for all participating replication groups. You can specify multiple groups, separated by commas, as well as wildcard characters (*).
별칭 |
RG,RgName |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-ScheduleType<GroupScheduleType>
Specifies a schedule type with no replication allowed or a full schedule that enables replication for 24 hours a day, 7 days a week using full bandwidth. Acceptable values are Never (0) and Always (1). You can specify either an enumerated string value or its corresponding integer value for this parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UseUTC<Boolean>
Indicates whether the destination computer uses Coordinated Universal Time (UTC) for its schedule. By default, the destination computer interprets the schedule according to its local time.
별칭 |
없음 |
필수 여부 |
false |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- Microsoft.DistributedFileSystemReplication.DfsReplicationGroup
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.DistributedFileSystemReplicationDfsrgroupSchedule
예제
Example 1: Modify a group schedule
This command uses the Set-DfsrGroupSchedule cmdlet to modify the RG01 replication group to allow full replication 24 hours a day, 7 days a week. The command also uses the ScheduleType parameter so there is no need to specify any specific bandwidth blocks or days.
PS C:\> Set-DfsrGroupSchedule -GroupName "RG01" -ScheduleType Always
Example 2: Modify a group schedule to prevent replication
This command uses the Set-DfsrGroupSchedule cmdlet to modify the RG01 replication group schedule to prevent all replication from 9AM to 5PM Monday through Friday, with all other intervals replicating at full bandwidth.
PS C:\> Set-DfsrGroupSchedule -GroupName "RG01" -Day Monday,Tuesday,Wednesday,Thursday,Friday -BandwidthDetail ffffffffffffffffffffffffffffffffffff00000000000000000000000000000000ffffffffffffffffffffffffffff