Get-IpamSubnet
Get-IpamSubnet
Gets a set of subnets from IPAM.
구문
Parameter Set: ByAF
Get-IpamSubnet [-AddressFamily] <AddressFamily[]> [-AddressSpace <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-NetworkType <VirtualizationType[]> ] [-ThrottleLimit <Int32> ] [-Unmapped] [ <CommonParameters>]
Parameter Set: ByBlock
Get-IpamSubnet -MappingToBlock <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ById
Get-IpamSubnet -NetworkId <String[]> [-AddressSpace <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-NetworkType <VirtualizationType[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-IpamSubnet cmdlet gets a set of IP subnets from IP Address Management (IPAM). By default, the cmdlet gets all IP addresses of a given address family from all address spaces configured in IPAM. Use the NetworkType and AddressSpace parameters to filter the result for Provider and Customer subnets, or NonVirtualized subnets.
This cmdlet also provides parameter sets to retrieve all subnets that map to a given IP address block.
매개 변수
-AddressFamily<AddressFamily[]>
Specifies an address family of IP addresses.이 매개 변수에 허용되는 값은 다음과 같습니다.
-- IPv4
-- IPv6
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AddressSpace<String[]>
Specifies an array of names of address spaces. If you not specify an address space, the cmdlet gets data for all address spaces configured in IPAM.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MappingToBlock<CimInstance>
Specifies the subnets that map to an address block.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-NetworkId<String[]>
Specifies an array of networks and prefixes. Specify the network ID in Classless Interdomain Routing (CIDR) notation in the format Network/Prefix.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkType<VirtualizationType[]>
Specifies the type of network for the given subnet. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Provider
-- Customer
-- NonVirtualized
If the value of the parameter is Default, then this parameter can take the value Provider or NonVirtualized. If the value of the parameter is Provider, then the value of this parameter, if specified, must be Provider. Specifying any other value for this parameter will result in an error. Similarly, if the value of the parameter is Customer, then the value of this parameter, if specified, must be Customer. Specifying any other value for this parameter will result in an error.
If you do not specify this parameter, the cmdlet returns all subnets that match the criteria, regardless of network type.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Unmapped
Indicates that the cmdlet gets subnets that are not mapped to any IP address block.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- IpamSubnet
예제
Example 1 Get all overlapping subnets
This command gets all overlapping subnets in the default address space, including Provider and NonVirtualized subnets in the default address space.
PS C:\> Get-IpamSubnet -AddressFamily IPv4 -AddressSpace Default | where {$_.Overlapping -eq $false}
Example 2: Get all non-virtualized subnets in a site
This command gets all non-virtualized subnets assigned to the site named Contoso AD-Site.
PS C:\> Get-IpamSubnet -AddressFamily IPv4 -NetworkType NonVirtualized|where {$_.CustomConfiguration -Like "*ADSite=Contoso*"}| Format-List Name, NetworkId, CustomConfiguration
Example 3: Get all IPv4 subnets
This command gets all provider IPv4 subnets in the default address space.
PS C:\> Get-IpamSubnet -AddressFamily IPv4 -NetworkType Provider -AddressSpace Default
Example 4: Get all unmapped non-virtualized subnets
This command gets all unmapped non-virtualized subnets in the default address space
PS C:\> Get-IpamSubnet -AddressFamily IPv4 -NetworkType NonVirtualized -Unmapped
Example 5: Get all subnets in a customer address space
This command gets all subnets that belong to the ContosoWest customer address space and a logical network.
PS C:\> Get-IpamSubnet -AddressFamily IPv4 -NetworkType Customer -AddressSpace ContosoWest|Where {$_.VmmLogicalNetwork -eq "Storage"}